ASUS P5N64 WS Manual De Usuario

4-14

Chapter 4: BIOS setup

4.3.6

SATA 1~6

While entering Setup, the BIOS automatically detects the presence of SATA

devices. There is a separate sub-menu for each SATA device. Select a device item

then press <Enter> to display the IDE device information.

The BIOS automatically detects the values opposite the dimmed items (Device,

Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and

SMART monitoring). These values are not user-configurable. These items show

N/A if no SATA device is installed in the system.

LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the

device supports this mode, and if the device was not previously formatted with LBA

mode disabled.

Configuration options: [Disabled] [Auto]

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

BIOS SETUP UTILITY

Main

Third IDE Master

Device : Hard Disk

Vendor : HDT722516DLA380

Size : 164.7GB

LBA Mode : Supported

Block Mode : 16Sectors

PIO Mode : 4

Async DMA : MultiWord DMA-2

Ultra DMA : Ultra DMA-6

SMART Monitoring: Supported

LBA/Large Mode

[Auto]

Block(Multi-sector Transfer) M [Auto]

PIO Mode

[Auto]

DMA Mode

[Auto]

SMART Monitoring

[Auto]

32Bit Data Transfer

[Enabled]

Select the type of

device connected to

the system.

DMA Mode [Auto]

Selects the DMA mode.

Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0]

[MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]

SMART Monitoring [Auto]

Allows you to enable or disable the HDD Self-Monitoring Analysis and Reporting

Technology (SMART) feature.

Configuration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer.

Configuration options: [Disabled] [Enabled]