ASUS sp98agp-x Manual De Usuario
ASUS SP98AGP-X User’s Manual
15
III. INSTALLATION
III. INST
ALLA
TION
Jumpers
1. Real Time Clock (RTC) RAM (RTCLR)
The CMOS RAM is powered by the onboard button cell battery. To clear the
RTC data: (1) Turn off your computer and remove the AC power , (2) Move this
jumper to “Clear CMOS,” (3) Move the jumper back to “Normal,” (4) Turn on
your computer, (5) Hold down <Delete> during bootup and enter BIOS setup to
re-enter user preferences.
RTC data: (1) Turn off your computer and remove the AC power , (2) Move this
jumper to “Clear CMOS,” (3) Move the jumper back to “Normal,” (4) Turn on
your computer, (5) Hold down <Delete> during bootup and enter BIOS setup to
re-enter user preferences.
Battery Test Jumper (RTCLR)
You can test the battery’s current by removing this jumper and attaching a cur-
rent meter to pins 1&2.
You can test the battery’s current by removing this jumper and attaching a cur-
rent meter to pins 1&2.
WARNING!
You must unplug the power cord to your power supply to ensure
that there is no power to your motherboard. The CMOS RAM containing BIOS
setup information may be cleared by this action. You must enter BIOS to “Load
Setup Defaults” and re-enter any user information after removing and reapply-
ing this jumper.
setup information may be cleared by this action. You must enter BIOS to “Load
Setup Defaults” and re-enter any user information after removing and reapply-
ing this jumper.
RTC RAM
RTCLR
Normal
[1-2] (Default)
Clear CMOS
[2-3] (momentarily)
RTC_VDD (Normal/Clear CMOS)
Normal (Default)
RTCLR
Clear CMOS
RTCLR
BA
TTER
Y
TEST
R
Jumper Settings