Axis 26720r1 Manual De Usuario

DNS (Domain Name Service) provides the translation of host names to IP addresses on your 

network.

Obtain DNS server address via DHCP - automatically use the DNS server settings provided 

by the DHCP server. Click the View button to see the current settings.

Use the following DNS server address - enter the desired DNS server by specifying the 

following:

Domain name - enter the domain(s) to search for the host name used by the AXIS 

231D+/232D+. Multiple domains can be separated by semicolons (;). The host name is 

always the first part of a Fully Qualified Domain Name, e.g. myserver is the host name in 

the Fully Qualified Domain Name myserver.mycompany.com where mycompany.com is 

the Domain name.

DNS servers - enter the IP addresses of the primary and secondary DNS servers.

The AXIS 231D+/232D+ can be accessed using a host name, instead of an IP address. The 

host name is usually the same as the assigned DNS Name. It is always the first part of a 

Fully Qualified Domain Name and is always one word, with no period. For example, 

myserver is the host name in the Fully Qualified Domain Name myserver.mycompany.com.

The enable dynamic DNS updates allows you to alias a dynamic IP address to a static host 

name, allowing your computer to be more easily accessed from various locations on the 

Internet. Outside users can always access your server using the associated DNS name 

regardless of the WAN IP. The DNS server used by the user and/or the DNS server 

responsible for the domain in use must support RFC2136 and allow updates from the AXIS 

231D+/232D+.

The TTL (Time To Live) value determines how long (in seconds) the reply from the DNS 

server should be remembered when checking that the domain name for the registered IP 

address is still valid. For more information, please see the online help

This is enabled by default and assigns the AXIS 231D+/232D+ an additional IP address for 

use with UPnP™. The AXIS 231D+/232D+ can have both a Link-Local IP and a 

static/DHCP-supplied IP address at the same time - these will not affect each other. 

HTTP 
The default HTTP port number (80) can be changed to any port within the range 

1024-65535. This is useful for e.g. simple port mapping.