3com 3800 Manual De Usuario
7-14
C
HAPTER
7: S
PANNING
T
REE
P
ROTOCOL
(STP)
Disabling and
Resetting STP
Resetting STP
To disable STP or return STP settings to their defaults, use the
commands listed in Table 7-2.
commands listed in Table 7-2.
CAUTION: If you ignore warnings and delete an STPD without
removing all of its VLAN members first, those VLANs will also be
deleted.
removing all of its VLAN members first, those VLANs will also be
deleted.
Table 7-2 STP Disable and Reset Commands
Command
Description
delete stpd <stpd_name>
Allows you to remove an STPD. An STPD can only be
removed if all VLANs have been deleted from it.
removed if all VLANs have been deleted from it.
disable stpd [<stpd_name> | all]
Allows you to disable the STP mechanism on one or all
STPDs.
STPDs.
disable stpd port <portlist>
Allows you to disable STP on one or more ports.
unconfig stpd {<stpd_name> | all}
Allows you to restore default STP values to one or all
STPDs.
STPDs.
SW3800.BK Page 14 Tuesday, May 5, 1998 5:20 PM