3com 3800 Manual De Usuario
4-8
C
HAPTER
4: C
OMMANDS
User Account
Commands
config devicemode [bridging | iprouting]
Allows you to configure the operating mode of the
Switch. Specify:
Switch. Specify:
■
bridging — Layer 2 bridging functions only
■
iprouting — Bridging and IP unicast routing
functions
functions
If this command is used while the Switch 3800 is up
and running, the Switch saves the configuration and
reboots. The default operating mode is “iprouting.”
and running, the Switch saves the configuration and
reboots. The default operating mode is “iprouting.”
unconfig switch {all}
Allows you to reset all Switch parameters (with the
exception of defined VLANs and IP addresses) to the
factory defaults. If you specify the keyword “all”, the
IP addresses are reset as well.
exception of defined VLANs and IP addresses) to the
factory defaults. If you specify the keyword “all”, the
IP addresses are reset as well.
ping {continuous} {size <number>}
<ipaddress>
<ipaddress>
Allows you to send ICMP echo messages to a remote IP
device. Specify:
device. Specify:
■
continuous — ICMP echo messages should be sent
continuously.
continuously.
■
size <n> — The size of the packet.
traceroute <ipaddress>
Allows you to trace the routed path between the
Switch and a destination endstation.
Switch and a destination endstation.
clear counters
Allows you to clear all statistical counters for the Switch
and ports.
and ports.
Table 4-4 General Switch Commands (continued)
Command
Description
Table 4-5 User Account Commands
Command
Description
show account
Displays the account names, access level, number of
successful and failed logon attempts, and the number
of active sessions in the user database. This command is
available only to admin level users.
successful and failed logon attempts, and the number
of active sessions in the user database. This command is
available only to admin level users.
create account [admin | user] <username>
{<password>}
{<password>}
Allows you to create a user account.
delete account <username>
Allows you to delete a user account.
config account <username> {<password>}
Allows you to change the password of an existing
account.
account.
SW3800.BK Page 8 Tuesday, May 5, 1998 5:20 PM