3com WX4400 3CRWX440095A Manual De Usuario
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
Configuring WPA
293
The passphrase must be from 8 to 63 characters long, including blanks. If
you use blanks, you must enclose the string in quotation marks.
you use blanks, you must enclose the string in quotation marks.
To configure service profile wpa to use passphrase
1234567890123<>?=+&% The quick brown fox jumps over the lazy sl,
type the following command:
1234567890123<>?=+&% The quick brown fox jumps over the lazy sl,
type the following command:
WX1200# set service-profile wpa psk-phrase "1234567890123<>
?=+&% The quick brown fox jumps over the lazy sl"
success: change accepted.
?=+&% The quick brown fox jumps over the lazy sl"
success: change accepted.
As an alternative to entering a passphrase, which MSS converts into a
key, you can enter the key itself in raw hexadecimal format. To enter a
PSK key in raw format, use the following command:
key, you can enter the key itself in raw hexadecimal format. To enter a
PSK key in raw format, use the following command:
set service-profile name psk-raw hex
For hex, type a 64-bit ASCII string representing a 32-digit hexadecimal
number. Enter the two-character ASCII form of each hexadecimal
number.
number. Enter the two-character ASCII form of each hexadecimal
number.
To configure service profile wpa to use a raw PSK with PSK clients, type a
command such as the following:
command such as the following:
WX1200# set service-profile wpa psk-raw c25d3fe4483e867d1df96
eaacdf8b02451fa0836162e758100f5f6b87965e59d
success: change accepted.
eaacdf8b02451fa0836162e758100f5f6b87965e59d
success: change accepted.
Disabling 802.1X Authentication for WPA
To disable 802.1X authentication for WPA clients, use the following
command:
command:
set service-profile name auth-dot1x {enable | disable}
This command does not disable 802.1X authentication for non-WPA
clients.
clients.
To disable WPA authentication in service profile wpa, type the following
command:
command:
WX1200# set service-profile wpa auth-dot1x disable
success: change accepted.
success: change accepted.