3com link 1000 Manual De Usuario

Descargar
Página de 152
4-8
C
HAPTER
 4: M
ANAGING
 T
HE
 S
WITCH
 1000
STP Use this button to display screens for managing 
Spanning Tree Protocol (STP) information for the 
level of management you have chosen (port or 
VLAN). Refer to 
 on 
.
STP is not supported over Asynchronous Transfer 
Mode (ATM). Consequently, if you specify that you 
want to manage the Plug-in Module and the 
Switch has an ATM OC-3c Module installed, the 
STP button is not displayed.
SERVER Use this button to display the VLAN Server 
screen, used for entering the IP address and com-
munity string of a VLAN server. For more informa-
tion about VLAN servers, refer to 
 on 
 
STATS
 Use this button to display statistics screens for 
the level of management you have chosen (port or 
unit). Refer to 
 
SDB
 Use this button to display the Unit Database 
View screen, which is used to manage the Switch 
Database. Refer to 
 on 
.
 
RESILIENCE
 Use this button to display resilient link 
management screens for the level of management 
you have chosen (port or unit). Refer to 
You cannot set up resilient links if the Switch uses 
Spanning Tree (STP). Consequently, the RESILIENCE 
button is not displayed if STP is enabled.
Figure 4-9   Switch Management screen for VLAN level
 
SETUP
 Use this button to display setup screens for 
the level of management you have chosen (port, 
unit or VLAN). For information about the Port 
Setup and Unit Setup screens, refer to 
 and 
in this chapter. For information about the VLAN 
Setup screen, refer to 
.