3com WXR100 3CRWXR10095A Manual De Usuario

The passphrase must be from 8 to 63 characters long, including blanks. If 
you use blanks, you must enclose the string in quotation marks. 

To configure service profile wpa to use passphrase 
1234567890123<>?=+&% The quick brown fox jumps over the lazy sl, 
type the following command:

WX1200# set service-profile wpa psk-phrase "1234567890123<>
?=+&% The quick brown fox jumps over the lazy sl"
success: change accepted.

As an alternative to entering a passphrase, which MSS converts into a 
key, you can enter the key itself in raw hexadecimal format. To enter a 
PSK key in raw format, use the following command:

set service-profile name psk-raw hex

For hex, type a 64-bit ASCII string representing a 32-digit hexadecimal 
number. Enter the two-character ASCII form of each hexadecimal 
number.

To configure service profile wpa to use a raw PSK with PSK clients, type a 
command such as the following:

WX1200# set service-profile wpa psk-raw c25d3fe4483e867d1df96
eaacdf8b02451fa0836162e758100f5f6b87965e59d
success: change accepted.

To disable 802.1X authentication for WPA clients, use the following 
command:

set service-profile name auth-dot1x {enable | disable}

To disable WPA authentication in service profile wpa, type the following 
command:

WX1200# set service-profile wpa auth-dot1x disable
success: change accepted.