3com WXR100 3CRWXR10095A Manual De Usuario
92
C
HAPTER
5: C
ONFIGURING
AND
M
ANAGING
P
ORTS
AND
VLAN
S
You must assign a name to a VLAN before you can add ports to the
VLAN. You can configure the name and add ports with a single set vlan
command or separate set vlan commands.
VLAN. You can configure the name and add ports with a single set vlan
command or separate set vlan commands.
Once you assign a VLAN number to a VLAN, you cannot change the
number. However, you can change a VLAN’s name.
number. However, you can change a VLAN’s name.
For example, to assign the name red to VLAN 2, type the following
command:
command:
WX1200# set vlan 2 name red
After you create a VLAN, you can use the VLAN number or the VLAN
name in commands. In addition, the VLAN name appears in CLI and
3Com Wireless Switch Manager displays.
name in commands. In addition, the VLAN name appears in CLI and
3Com Wireless Switch Manager displays.
Adding Ports to a VLAN
To add a port to a VLAN, use the following command:
set vlan vlan-id port port-list [tag tag-value]
You can specify a tag value from 1 through 4093.
MSS does not remove a port from other VLANs when you add the port to
a new VLAN. If a new VLAN causes a configuration conflict with an older
VLAN, remove the port from the older VLAN before adding the port to
the new VLAN.
a new VLAN. If a new VLAN causes a configuration conflict with an older
VLAN, remove the port from the older VLAN before adding the port to
the new VLAN.
For example, to add ports 3 through 6 and port 8 to VLAN red, type the
following command:
following command:
WX1200# set vlan red port 3-6,8
success: change accepted.
success: change accepted.
Optionally, you also can specify a tag value to be used on trunked 802.1Q
ports.
ports.
To assign the name marigold to VLAN 4, add ports 1 through 4 and port
6, and assign tag value 11 to port 6, type the following commands:
6, and assign tag value 11 to port 6, type the following commands:
WX1200# set vlan 4 name marigold port 1-4
success: change accepted.
WX1200# set vlan 4 name marigold port 6 tag 11
success: change accepted.
success: change accepted.
WX1200# set vlan 4 name marigold port 6 tag 11
success: change accepted.