3com WX1200 3CRWX120695A Manual De Usuario
210
C
HAPTER
10: C
ONFIGURING
MAP A
CCESS
P
OINTS
(To configure a radio profile, see “Configuring a Radio Profile” on page 240.)
frag-threshold
2346
Uses the short-retry-count for frames shorter
than 2346 bytes and uses the
long-retry-count for frames that are 2346
bytes or longer.
than 2346 bytes and uses the
long-retry-count for frames that are 2346
bytes or longer.
max-rx-lifetime
2000
Allows a received frame to stay in the buffer
for up to 2000 ms (2 seconds).
for up to 2000 ms (2 seconds).
max-tx-lifetime
2000
Allows a frame that is scheduled for
transmission to stay in the buffer for up to
2000 ms (2 seconds).
transmission to stay in the buffer for up to
2000 ms (2 seconds).
preamble-length short
Advertises support for short 802.11b
preambles, accepts either short or long 802.11b
preambles, and generates unicast frames with
the preamble length specified by the client.
preambles, accepts either short or long 802.11b
preambles, and generates unicast frames with
the preamble length specified by the client.
Note: This parameter applies only to
802.11b/g radios.
802.11b/g radios.
qos-mode
wmm
Classifies and marks traffic based on 802.1p
and DSCP, and optimizes forwarding
prioritization of MAP radios for Wi-Fi
Multimedia (WMM).
and DSCP, and optimizes forwarding
prioritization of MAP radios for Wi-Fi
Multimedia (WMM).
rfid-mode
disable
Radio does not function as a location
receiver in an AeroScout Visibility System.
receiver in an AeroScout Visibility System.
rts-threshold
2346
Transmits frames longer than 2346 bytes by
means of the
Request-to-Send/Clear-to-Send (RTS/CTS)
method.
means of the
Request-to-Send/Clear-to-Send (RTS/CTS)
method.
service-profile
No service
profiles defined
profiles defined
You must configure a service profile. The
service profile sets the SSID name and other
parameters.
service profile sets the SSID name and other
parameters.
wmm-powersave disable
Requires clients to send a separate PSpoll to
retrieve each unicast packet buffered by the
MAP radio.
retrieve each unicast packet buffered by the
MAP radio.
Table 12 Defaults for Radio Profile Parameters (continued)
Parameter
Default Value
Radio Behavior When Parameter Set to
Default Value
Default Value