3com WX1200 3CRWX120695A Manual De Usuario

5 Create a Mobility Profile called tulip by typing the following commands:

WX1200# set mobility-profile name tulip port 2,5
success: change accepted. 
WX1200# set mobility-profile mode enable
success: change accepted.
WX1200# display mobility-profile
Mobility Profiles
Name

 Ports

=========================
tulip

AP 2
AP 5

6 To assign Mobility Profile tulip to all users at EXAMPLE, type the following 

command for each EXAMPLE\ user:

WX1200# set user EXAMPLE\username attr mobility-profile tulip

Users at EXAMPLE are now restricted to ports 2 and 5, as specified in the 
tulip Mobility Profile configuration. 

7 Use the display aaa command to verify your configuration. Type the 

following command:

WX1200# display aaa
Default Values
authport=1812 acctport=1813 timeout=5 acct-timeout=5
retrans=3 deadtime=0 key=(null) author-pass=(null)
Radius Servers
Server

Addr

  Ports

T/o Tries Dead State

-------------------------------------------------------------------

Web Portal:
enabled

set accounting dot1x ssid mycorp EXAMPLE\* stop-only local
set authentication dot1x ssid mycorp EXAMPLE\* pass-through shorebirds
user tech

Password = 1315021018 (encrypted)

user EXAMPLE/nin

filter-id = acl.101.in
mobility-profile = tulip

user EXAMPLE/tamara

filter-id = acl.101.in
mobility-profile = tulip

...