3com WX4400 3CRWX440095A Manual De Usuario

Descargar
Página de 198
174
C
HAPTER
 7: M
ANAGING
 
AND
 M
ONITORING
 Y
OUR
 N
ETWORK
12 To enable countermeasures against rogues detected by radios managed 
by this profile, select one of the following from the Countermeasures 
Mode pull-down list:
„
None—Radios do not use countermeasures. This is the default.
„
All—Radios use countermeasures against devices classified by MSS as 
rogues and against devices classified by MSS as interfering devices. 
A rogue is a device that is in the 3Com network but does not belong 
there. An interfering device is not part of the 3Com network but also is 
not a rogue. MSS classifies a device as an interfering device if no client 
connected to the device has been detected communicating with any 
network entity listed in the forwarding database (FDB) of any WX switch 
in the Mobility Domain. Although the interfering device is not connected 
to your network, the device might be causing RF interference with MAP 
radios.
„
Rogue—Radios use countermeasures against devices classified by MSS 
as rogues, but do not use countermeasures against devices classified 
by MSS as interfering devices.
CAUTION: Countermeasures affect wireless service on a radio. When a 
MAP radio is sending countermeasures, the radio is disabled for use by 
network traffic, until the radio finishes sending the countermeasures.
„
Configured—Causes radios to attack only devices specified in the 
attack list on the WX switch (on-demand countermeasures). When 
this option is used, devices found to be rogues by other means, such 
as policy violations or by determining that the device is providing 
connectivity to the wired network, are not attacked.