Arcam dv27 Manual De Usuario
18
Technical specifi cations
General
Power Requirements
115V or 230V AC, set by voltage selector switch on rear panel
Power consumption
<30W
Dimensions
430mm x 90mm x 280mm
Weight net:
6.2kg
packed:
7.8kg
Video outputs
Composite video
1 x gold plated phono:
1V pk-pk into 75
Ω
S-Video
1 x 4-pin mini-DIN:
Y 1V pk-pk in 75
Ω
, C 0.3V pk-pk into 75
Ω
Component video
3 gold plated phono sockets:
Y 1V pk-pk into 75
Ω
; Pb 0.7V pk-pk into 75
Ω
; Pr 0.7V pk-pk into 75
Ω
.
SCART socket with RGB video
All 0.7V into 75
Ω
, composite video 1V into 75
Ω
, and stereo audio.
Auto switching of TV with aspect ratio control
Progressive scan video
Pure Progressive
™
motion adaptive 4-field processing by Silicon Image Corporation
3 gold plated phono sockets:
525P component video. Y 1V pk-pk into 75
Ω
; Pb 0.7V pk-pk into 75
Ω
; Pr 0.7V pk-pk into 75
Ω
Audio outputs
Analogue audio outputs
Two pairs of stereo outputs on gold plated phono sockets
Output level
2.2V rms at 0dB signal
Frequency response
20Hz to 20kHz (+0.1db, –0.5dB)
THD+N
<0.005% for 1kHz 0dB signal, measured 22Hz–22kHz, unweighted
S/N 105dB,
measured
20Hz–20kHz, unweighted
Digital audio output (IEC958)
PCM/Dolby digital/MPEG/DTS on gold plated phono (coaxial) and TOSLINK (optical)
Accessories supplied
CR-314 remote control
2 x AAA batteries
Mains
lead
E&OE
Continual improvement policy
Arcam has a policy of continual improvement for its products. This
means that designs and specifications are subject to change without
notice.
means that designs and specifications are subject to change without
notice.
NOTE: All specification values are typical unless otherwise stated.