AirLive live-fsh8ps Guía Del Usuario
3
3
Live Series Switches
For normal operation, please make sure your VLAN switch is in “OFF”
Position
Position
VLAN Selector (Live FSH16T+ only)
ON: Every port in its own VLAN group sharing Port 8 and 16
OFF: VLAN function off, the switch operates in normal mode
Live-FSH16T+ is equipped with VLAN selector switch in the back panel.
When activated, each port will be in its own VLAN group with 2 sharing
ports. Ports in different VLAN groups cannot see each other. However,
everyone can see the sharing port. Please make sure your VLAN
selector is in “OFF” position if you are not using the VLAN function.
When activated, each port will be in its own VLAN group with 2 sharing
ports. Ports in different VLAN groups cannot see each other. However,
everyone can see the sharing port. Please make sure your VLAN
selector is in “OFF” position if you are not using the VLAN function.
Connectivity Rules
Please avoid forming a network loop (see the
diagram on the right) when connecting the cables.
A network loop can cause the network to shutdown..
diagram on the right) when connecting the cables.
A network loop can cause the network to shutdown..
The maximum cable distance is 100 meter
Always check the LED lights for trouble shooting
Computers and network devices must be in the
same IP subnet in order to see each other. For
example, 198.168.0.1 can not see 192.192.1.1 for
Class C subnet. You can find out the computer’s IP
address by typing “IPCONFIG” in WinNT/2000/XP’s
command line. For Win9x, run “WINIPCFG”.
same IP subnet in order to see each other. For
example, 198.168.0.1 can not see 192.192.1.1 for
Class C subnet. You can find out the computer’s IP
address by typing “IPCONFIG” in WinNT/2000/XP’s
command line. For Win9x, run “WINIPCFG”.
Avoid operating device in 10Mbps full duplex mode
if the device does not have auto-negotiation
function.
if the device does not have auto-negotiation
function.
English
English