australian-monitor amis120p Manual De Usuario
Clever Features, Contractor Friendly
Operating Manual
AMIS120P, 120 Watt Power Amplifier
Product Description
The AMIS120P is a 120 watt single channel power amplifier designed for commercial installations. It can
be used for either low impedance (4 or 8 ohm) or 25v/70v line speaker systems. The amplifier can be
mounted in a standard 19” equipment rack (rack ears supplied) or it can be mounted on a shelf or table. The
AMIS120P features a line level input (with parallel output) and is normally used with mixers, mixer
amplifiers or other power amplifiers. The AMIS120P also features 24 volt DC operation.
be used for either low impedance (4 or 8 ohm) or 25v/70v line speaker systems. The amplifier can be
mounted in a standard 19” equipment rack (rack ears supplied) or it can be mounted on a shelf or table. The
AMIS120P features a line level input (with parallel output) and is normally used with mixers, mixer
amplifiers or other power amplifiers. The AMIS120P also features 24 volt DC operation.
Front Panel Features
Power Switch
The black rocker switch on the right hand side of the front panel is used to switch the amplifier on and off.
The ‘up’ position is on. When the amplifier is connected to an appropriate AC power source and is
switched on, the blue power LED will illuminate. This switch will not switch DC power on or off in DC
operation. In DC operation mode, the amplifier is always on and the blue power LED will always be
illuminated.
The ‘up’ position is on. When the amplifier is connected to an appropriate AC power source and is
switched on, the blue power LED will illuminate. This switch will not switch DC power on or off in DC
operation. In DC operation mode, the amplifier is always on and the blue power LED will always be
illuminated.