australian-monitor tx8201 Folleto

Engineered and Distributed By AUDIO TELEX COMMUNICATIONS PTY LTD (

ABN 78 001 345 482

), 149 Beaconsfield Street, Silverwater, Sydney, NSW, 2128 Australia

NSW Tel: (02) 9647 1411 Fax: (02) 9648 3698   VIC Tel: (03) 9890 7477 Fax: (03) 9890 7977   QLD Tel: (07) 3852 1312 Fax: (07) 3252 1237   WA Tel: (08) 9228 4222 Fax: (08) 9228 4233   

TAS Tel: (03) 6228 6373 Fax: (03) 6278 1063   SA Tel: (08) 8352 4444 Fax: (08) 8352 4488   Export Enquiries: export@audiotelex.com.au   

Website: www.australianmonitor.com.au

ARCHITECTURAL AND ENGINEERING SPECIFICATIONS

The mixer shall have 6 balanced mic/line inputs and 2 stereo line inputs. The mic/line channels shall be

balanced and feature 3 pin female XLR sockets. The stereo line channels shall have dual female RCA

sockets. Each channel shall include tamper resistant treble, bass, and pan controls. The first six chan-

nels feature a line level direct output which can be used to feed additional amplifiers, mixers or record-

ing devices. An internal jumper shall allow the first six inputs to be removed from the master left/right

outputs whilst still retaining their direct output function. The equalisation per channel shall provide

12dB cut or boost at 100Hz and 10dB cut or boost at 10kHz. The master section shall include individ-

ual level controls for both the Left and Right outputs and shall also include two 7 segment output level

LED meters. The master outputs shall be balanced 3 pin XLR male sockets, and dual RCA female sock-

ets for the stereo tape output. A 1/4” stereo headphone socket shall be included for monitoring. The

mixer shall include muting card, as well as a 4 tone generator.

The mixer shall be of high quality, suitable for both live and commercial applications. It should have

ample headroom and a frequency response of no less than 50Hz - 15kHz (±3dB). Total Harmonic dis-

tortion shall be no more than 0.1% at 1kHz. The S/N ratio shall be -74dBV or better. Phantom Power

of no less than 15V DC shall be available on all microphone inputs. An internal switch to disable the

phantom power on any of the mic/line channels shall also be included. The unit shall be packaged in a

rugged 1 RU metal chassis suitable for desk or rack mounting.

The mixer shall be an Australian Monitor Installation Series  model TX8201.

Frequency Response

50Hz - 15kHz (± 3dB)

Total Harmonic Distortion

Less than 0.1% @ 1kHz

Signal To Noise Ratio

-74dBV (all channels at centre position)

Tone Controls

Bass @ 100Hz - Boost +12dB, Cut -12dB; Treble @ 10kHz - Boost +10dB, Cut -10dB

Inputs

6 active balanced mic/line inputs with 3 pin XLR female sockets (200 - 600 Ohms). 

Maximum Input Level is 500mV. 2 Stereo Line inputs with dual female 

RCAs (47K Ohms). Maximum Input Level is 1.5V.

Input Sensitivity

Mic: 1mV @ 200 Ohms; Line 1 - 6: 150mV - 1V @ 47K Ohms;

Line 7 - 8: 125mV @ 47K Ohms

Phantom Power

15V DC on all mic channels (switchable)

Outputs

Left & Right Master Outputs, 3 pin XLR male sockets. (1.5V @ 600 Ohms.) 

Maximum Output Level: +20dB Stereo Headphone Output, 1/4” stereo socket. 

(3.5V @ 600 Ohms) Stereo Tape Output, dual female RCA connectors. 

(400mV @ 10K Ohms). Six direct line level outputs (600mV @ 10K Ohms)

Controls

Level Control per channel, Recessed Treble, Bass and Pan Controls per channel, 

Left and Right Master Level Controls

Indicators

Power “on” orange LED, 7 segment LED meters for both L and R outputs

Power Source

AC: 240V - 50Hz or 110V - 60Hz (special order) 3 pin IEC connector

Power Consumption

7 Watts

Dimensions/Weight

44mm H x 482mm W x 250mm D (Chassis dimensions only). 4kg