Avaya office 5410 Manual De Usuario

Page 48 - Function Key Programming 

Function Keys 

Page 48 - Function Keys 

IP Office 5410 User’s Guide  

Function Key Programming 

40DHB0002UKEY – Issue 1 (7th February 2005) 

See also:  
•  AutCB - Automatic Callback (!) on page 31. 
  

Cancels any set ringback when free function.  
This function does not require any data entered when programmed. This function 
cannot be programmed through the phone by the user.  
Pressing 

 RBak- switches off any set ring back when free. If the ringback was set 

using a 

 AutCB key, that key will still appear with a   symbol that can be cancelled 

by pressing the 

 AutCB key again. 

 

[User | Digital Telephony | Advanced | Miscellaneous | Cancel Ringback When 
Free] 

  

Sets the ringing pattern (sequence) used for voicemail and ringback calls.  
This function is currently not supported on the 5410 telephone. 
 
 
 
 
 
 
 

Records the current call at the specified target extension.  
This function requires entry of a target extension number when programmed. This 
function cannot be programmed through the phone by the user.  
When 

 Recor is pressed, the target extensions current call is recorded into their 

voicemail mailbox.  

is enabled, the call parties will hear a warning before the recording takes 
place. In some locations it may be a legal requirement to advise callers that a 
call is being recorded.  
 

[User | Digital Telephony | Advanced | Call | Call Record] 

See also: 
•  Listn - Call Listen on page 46. 
•  Steal - Call Steal on page 53. 
  

Pulse the specified external output relay (1 or 2) on for 5 seconds.  
This function requires the relay switch (1 or 2) on the telephone system to be entered 
when programmed. This function cannot be programmed through the phone by the 
user.  
Pressing 

 Relay switches the specified relay on for 5 seconds and then off.  

 

[User | Digital Telephony | Advanced | Relay | Relay Pulse] 

  

Switch the specified external output relay (1 or 2) on.