HP 20-700 Manual De Usuario

118 Operating in Automated Mode

Chapter 4

Operating in Demo Mode

With the library in Demo Mode (demonstration mode), the hand takes a data 

cartridge from a storage cell, moves the cartridge, and places the cartridge 

back into a different storage cell.

Caution

Audit update required: If DEMO MODE is interrupted, Get-Put 

Loop operations will become disrupted, and cartridges may not 

be returned to their original locations. When DEMO MODE 

completes, you must IPL to re-audit the library, and your backup 

software applications . You must then notify the customer to 

update the host cartridge database.

To operate in Demo Mode:
1.  Ensure the library and drives are not in use.
2. Press 

the [MENU] button until the Main Menu displays.

3.  Press the arrow buttons until the cursor underscores DIAGNOSTICS.
4. Press the [SELECT] button.

The panel displays the Main Diagnostics menu.

5.  Press the arrow buttons until the cursor underscores DEMO MODE.
6. Press 

the 

[SELECT] button.

The Demo Mode menu appears.

7.  Use the arrow buttons to enter the desired number of loops. The up arrow 

button increases the value by 100; the down arrow button decreases the 

value by 100.

Note

HP does not recommend looping tests excessively.