HP designjet l65500 Manual
3.
Grip the handle and pull the whole printhead cleaning roll assembly out through the door.
4.
Slide both rolls off their axles and dispose of the roll with the used cleaning material according to
the instructions provided with the new roll. Keep the empty core to use as a takeup core.
the instructions provided with the new roll. Keep the empty core to use as a takeup core.
5.
Slide the new roll onto the upper axle. It clicks into place.
6.
Pull the black knob on the upper left and move the pinch system aside.
7.
Pass the leading edge of the roll over the upper rollers, and thread the cleaning material through
the rollers on the left.
the rollers on the left.
8.
There is a strip of polyester film on the leading edge of the cleaning material. Insert it into the hole
in the takeup core, which takes hold of it.
in the takeup core, which takes hold of it.
ENWW
Replace the printhead cleaning roll and aerosol filters
25
Hardwa
re ma
int
enance