HP digital mp3130 Manual De Usuario

HP might periodically release updated versions of the projector firmware to enhance 
the projector performance. The projector firmware version is shown in the on-screen 
menu at Help > About this projector. Check for updated versions at 
http://www.hp.com/go/proj_firmware.

1. On a computer with a VGA port and USB port, go to the HP projector upgrade 

website (see introduction for this section) and download the latest file intended for 
a USB upgrade.

2. Connect the M1-to-VGA/USB cable between the M1 port on the projector and the 

VGA port on the computer.

3. Connect the USB plug of the M1-to-VGA/USB cable into the USB port on the 

computer. This connection is required.

4. On the computer, run the file you downloaded by double-clicking the file. Follow 

the on-screen instructions. Do not turn off the projector until you are prompted.