HP digital mp3130 Manual De Usuario
User’s Guide
65
Fixing Problems
Sound problems
If no sound is coming out of the projector:
❏
Be sure you have an audio cable securely connected between the
projector and the input device.
projector and the input device.
❏
Be sure that the mute and volume settings are correct on the input
device, such as a computer, DVD player, or camcorder.
device, such as a computer, DVD player, or camcorder.
❏
Open the on-screen menu and select Audio. Check the following
settings:
settings:
◆
Mute is turned off.
◆
Volume is correct.
Interruption problems
If the lamp indicator or temperature indicator turns on or blinks:
❏
If the lamp indicator turns on, the lamp has failed. Install a new
lamp.
lamp.
❏
If the lamp indicator blinks, the lamp is not able to light. Wait for
the projector to cool, then try starting it again. If the indicator
blinks again, install a new lamp.
the projector to cool, then try starting it again. If the indicator
blinks again, install a new lamp.
❏
If the temperature indicator turns on or blinks, the projector is too
hot. See the following problem.
hot. See the following problem.
If the projector suddenly shuts down and the temperature light turns on:
❏
If the temperature light is blinking, the fan is not working. Allow
the projector to cool for several minutes.
the projector to cool for several minutes.
❏
If the temperature light is steady, the projector has overheated.
Allow it to cool for several minutes.
Allow it to cool for several minutes.
❏
If airflow is obstructed, remove the obstruction.
❏
If possible, remove any sources of excess heat in the room.
❏
If the condition occurs after restarting the projector, contact HP
to have the projector serviced or repaired.
to have the projector serviced or repaired.