HP dl385 Manual De Usuario

 

Troubleshooting 73 

 

WARNING:

  To reduce the risk of personal injury or damage to the equipment, be sure that: 

•

 

The leveling feet are extended to the floor. 

•

 

The full weight of the rack rests on the leveling feet. 

•

 

The stabilizing feet are attached to the rack if it is a single-rack installation.  

•

 

The racks are coupled together in multiple-rack installations.  

•

 

Only one component is extended at a time. A rack may become unstable if more than one 

component is extended for any reason. 

  

 

  

 

WARNING:

  To reduce the risk of electric shock or damage to the equipment: 

•

 

Do not disable the power cord grounding plug. The grounding plug is an important safety 

feature. 

•

 

Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all 

times. 

•

 

Unplug the power cord from the power supply to disconnect power to the equipment. 

•

 

Do not route the power cord where it can be walked on or pinched by items placed against 

it. Pay particular attention to the plug, electrical outlet, and the point where the cord 
extends from the server. 

  

 

  

 

 

20.41 - 27.22 kg 

47.18 - 60.0 lb 

WARNING:

  To reduce the risk of personal injury or damage to the equipment: 

•

 

Observe local occupation health and safety requirements and guidelines for 

manual handling. 

•

 

Obtain adequate assistance to lift and stabilize the chassis during installation or 

removal. 

•

 

The server is unstable when not fastened to the rails. 

•

 

When mounting the server in a rack, remove the power supplies and any other 
removable module to reduce the overall weight of the product. 

  

 

  

 

CAUTION:

  To properly ventilate the system, you must provide at least 7.6 cm (3.0 in) of 

clearance at the front and back of the server. 

  

  

 

CAUTION:

  The server is designed to be electrically grounded (earthed). To ensure proper 

operation, plug the AC power cord into a properly grounded AC outlet only. 

  

 

Symptom information 

Before troubleshooting a server problem, collect the following information: 

•

 

What events preceded the failure? After which steps does the problem occur? 

•

 

What has been changed since the time the server was working? 

•

 

Did you recently add or remove hardware or software? If so, did you remember to change the 

appropriate settings in the server setup utility, if necessary? 

•

 

How long has the server exhibited problem symptoms? 

•

 

If the problem occurs randomly, what is the duration or frequency?