HP dl785 Manual De Usuario
Removing the system battery
If the server no longer automatically displays the correct date and time, you may need to replace
the battery that provides power to the real-time clock. Under normal use, battery life is 5 to 10
years.
the battery that provides power to the real-time clock. Under normal use, battery life is 5 to 10
years.
WARNING!
The computer contains an internal lithium manganese dioxide, a vanadium
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:
properly handled. To reduce the risk of personal injury:
•
Do not attempt to recharge the battery.
•
Do not expose the battery to temperatures higher than 60°C (140°F).
•
Do not disassemble, crush, puncture, short external contacts, or dispose of batteries in fire
or water.
or water.
•
Replace the battery only with the spare designated for this product.
To remove the battery:
1.
1.
Power down the server (
2.
Extend or remove the server from the rack (
3.
Remove the access panel (
4.
Locate the battery on the SPI board (
).
5.
Remove the battery.
To replace the component, reverse the removal procedure.
Run the RBSU to configure the server after replacing the battery. For more detailed information
see the HP ROM-Based Setup Utility User Guide on the Documentation CD.
see the HP ROM-Based Setup Utility User Guide on the Documentation CD.
Removing the system battery
37