HP lp2465 Manual De Usuario

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other 
attached devices, then follow the instructions below. 

Be sure the master power switch, located on the rear panel of the monitor, is in the off 

position. The master power switch turns off all power to the monitor. 

Installing the Monitor Pedestal Base  

Do not install the pedestal base if the monitor will be used on a wall, swing arm, or 

other mounting fixture; instead see the section on 

 in this chapter. 

Using both hands, position the monitor over the pedestal base. 

Do not touch the surface of the LCD panel. Pressure on the panel may 

cause non-uniformity of color or disorientation of the liquid crystals. If this occurs the 
screen will not recover to its normal condition. 

Press down firmly on the monitor to lock the pedestal base in place. When the base locks, it will 
make a clicking sound. 

  Inserting the Monitor into the Pedestal Base 

Be sure the pedestal base is securely locked before continuing with the setup. 

Installing the Monitor Pedestal Base 

5