HP photosmart 850 Manual De Usuario

74

hp photosmart 850 user’s manual

My image is

too bright.

The flash

provided too

much light.

Turn off the flash (press the pop-

up flash assembly down until it

snaps shut).

A natural or

artificial source

other than the

flash provided

too much light.

Try taking the picture from a

different angle. Avoid pointing

the camera directly toward a

bright light or reflective surface on

a sunny day. Use the

Flash On

setting (see page 29) or adjust

the

Exposure Compensation

(see

You were too

close to the

subject to use

the flash.

Move back from the subject or set

the flash to

Flash Off

and take the

picture again.

My image is

too dark.

There was not

enough light.

Wait for natural lighting

conditions to improve, add

indirect lighting, or adjust the

Exposure Compensation

(see

The flash was

on, but the

subject was too

far away.

Make sure your subject is within

the flash working distance (see

Appendix C: Specifications

page 99) or try turning flash off

(will require a longer exposure).

A light shone

behind the

subject.

Use the

Flash On

setting (see

page 29) to brighten the subject.

Or adjust the

Exposure

Compensation

(see page 28).

Your finger

blocked the

flash.

Be sure to move your fingers

away from the flash when you

take a picture.

Problem

Possible cause Solution