HP proliant dl580 Manual De Usuario
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
NOTE: For additional memory information and configuration rules, please see the memory section of the DL580 G5 User
Guide at:
NOTE: For additional memory information and configuration rules, please see the memory section of the DL580 G5 User
Guide at:
.
HP ProLiant DL580 G5 - Base memory configuration for 16 DIMM sockets in the 4 GB configuration
Standard Memory
4 GB PC2-5300 Fully Buffered DIMMs (DDR2-667) (4 x 1 GB)
All HP ProLiant DL580 G5 systems come standard with 4 banks of memory sockets spanning 4 memory channels for a total
of 16 DIMM sockets on board memory . Memory slots xA and xB already populated with memory (2P models with 4x 1GB
FBDIMM memory modules and 4P models with 4x 2GB FB DIMM memory modules) to help achieve maximum performance.
Standard Memory
4 GB PC2-5300 Fully Buffered DIMMs (DDR2-667) (4 x 1 GB)
All HP ProLiant DL580 G5 systems come standard with 4 banks of memory sockets spanning 4 memory channels for a total
of 16 DIMM sockets on board memory . Memory slots xA and xB already populated with memory (2P models with 4x 1GB
FBDIMM memory modules and 4P models with 4x 2GB FB DIMM memory modules) to help achieve maximum performance.
Upgrading Memory and Memory Interleaving
To achieve maximum memory performance and flexibility, the HP ProLiant DL580 G5 requires memory to be upgraded in
groups of four identical FBDIMMs populated across the four memory channels. In simple terms, the two FBDIMM locations
at xC and the two xD locations must be populated with four identical part numbered FBDIMMs. Memory population continues
by populating locations xE and xF, then xG and xH. FBDIMM architecture does not allow any gaps in this sequence such
that if locations xE and xF were populated and xC and xD were not, the memory at xE and xF would not be recognized by
the system.
To achieve maximum memory performance and flexibility, the HP ProLiant DL580 G5 requires memory to be upgraded in
groups of four identical FBDIMMs populated across the four memory channels. In simple terms, the two FBDIMM locations
at xC and the two xD locations must be populated with four identical part numbered FBDIMMs. Memory population continues
by populating locations xE and xF, then xG and xH. FBDIMM architecture does not allow any gaps in this sequence such
that if locations xE and xF were populated and xC and xD were not, the memory at xE and xF would not be recognized by
the system.
Standard Memory Plus Optional Memory
Up to 128 GB memory is available with the removal of the standard memory and the installation of 1 GB, 2 GB, 4 GB, and/or
8 GB PC2-5300 Fully Buffered DIMMs. Up to 256 GB memory is available with the removal of the standard memory, the
installation of the DL580 G5 Memory Expansion Boards Option, and the installation of 8 GB PC2-5300 Fully Buffered
DIMMs.
Up to 128 GB memory is available with the removal of the standard memory and the installation of 1 GB, 2 GB, 4 GB, and/or
8 GB PC2-5300 Fully Buffered DIMMs. Up to 256 GB memory is available with the removal of the standard memory, the
installation of the DL580 G5 Memory Expansion Boards Option, and the installation of 8 GB PC2-5300 Fully Buffered
DIMMs.
Standard Memory Replaced with Optional Memory and Utilizing the Optional Memory Expansion Boards
Up to 128 GB memory is available with the removal of the standard memory and the optional installation of PC2-5300 Fully
Buffered DIMMs (DDR2-667) memory kits. When utilizing the Optional Memory Expansion boards the FBDIMM population
rules apply. Four identical FBDIMMs must be populated across the four memory channels. The FBDIMM locations on the
Expansion boards are labeled so that four FBDIMMs should be populated in the A locations on each board, followed by
populating the four B locations continuing this sequence through locations D. eq.
Up to 128 GB memory is available with the removal of the standard memory and the optional installation of PC2-5300 Fully
Buffered DIMMs (DDR2-667) memory kits. When utilizing the Optional Memory Expansion boards the FBDIMM population
rules apply. Four identical FBDIMMs must be populated across the four memory channels. The FBDIMM locations on the
Expansion boards are labeled so that four FBDIMMs should be populated in the A locations on each board, followed by
populating the four B locations continuing this sequence through locations D. eq.
Memory
Embedded DIMM Sockets
1
2
3
4
5
6
7
8
1A
2C
3E
4G
5A
6C
7E
8G
Standard
4 GB
1 GB
Empty
Empty
Empty
1 GB
Empty
Empty
Empty
Standard +
Optional
Maximum:
100 GB
Shown:
28 GB
1 GB
2 GB
2 GB
2 GB
1 GB
2 GB
2 GB
2 GB
Maximum
(Without
Memory
Expansion
Boards
Option)
128 GB
8 GB
8 GB
8 GB
8 GB
8 GB
8 GB
8 GB
8 GB
Memory
Embedded DIMM Sockets
9
10
11
12
13
14
15
16
9B
10D
11F
12H
13B
14D
15F
16H
Standard
4 GB
1 GB
Empty
Empty
Empty
1 GB
Empty
Empty
Empty
Standard +
Optional
Maximum:
100 GB
Shown:
28 GB
1 GB
2 GB
2 GB
2 GB
1 GB
2 GB
2 GB
2 GB
QuickSpecs
HP ProLiant DL580 Generation 5
Memory
DA - 12770 Worldwide QuickSpecs — Version 18 — 7.18.2008
Page 33