HP proliant bl e-class Manual De Usuario

 

1 

Gigabit Ethernet port 26 connector on Switch B 

Interconnect switch 

2 

Gigabit Ethernet port 25 connector on Switch B 

Interconnect switch 

3 

Integrated Administrator management RJ-45 
connector (Switch A Port 24—10/100 Ethernet) 

Integrated Administrator module 

4 

Integrated Administrator console connector (serial) 

Integrated Administrator module 

5 

Reserved for future use 

Integrated Administrator module 

6 

Reserved for future use 

Integrated Administrator module 

7 

Gigabit Ethernet port 26 connector on Switch A 

Interconnect switch 

8 

Gigabit Ethernet port 25 connector on Switch A 

Interconnect switch 

9 

Combined interconnect switch and Integrated 
Administrator Reset button  

Integrated Administrator module 

 

 

CAUTION:  Do not use the enclosure link (RJ-45) connectors (refer to items 5 and 6 in Table 
1-1) on the Integrated Administrator module. Connecting an external device to these 
enclosure link (RJ-45) connecters can damage the external device. 

 

IMPORTANT:  Resetting the interconnect switch disconnects the server blades from the network while 
the switch is rebooting. To reset the interconnect switch, press the Reset button for at least four 
seconds. To reset only the Integrated Administrator module, press the Reset button for less than four 
seconds. 

The ProLiant BL e-Class C-GbE Interconnect Switch LEDs provide information about switch 
health, link speed and activity, and stacking status.