HP proliant bl e-class Manual De Usuario
Setting up and Installing the Interconnect Switch
Configuring Multiple Switch Modules
You can configure multiple switch modules by using scripted Command Line Interface (CLI)
commands through Telnet or by downloading a configuration file using a TFTP server.
commands through Telnet or by downloading a configuration file using a TFTP server.
Using Scripted CLI Commands through Telnet
The CLI, provided with the interconnect switch, allows you to execute customized
configuration scripts on multiple switch modules. A configuration script can be tailored to
one of the multiple switch modules, and then that configuration can be deployed to other
switch modules from a central deployment sever.
configuration scripts on multiple switch modules. A configuration script can be tailored to
one of the multiple switch modules, and then that configuration can be deployed to other
switch modules from a central deployment sever.
Using a Configuration File
If you plan for the base configuration of multiple switch modules in your network to be the
same, you can manually configure one switch module, upload the configuration to a TFTP
server, and use that configuration file as a base configuration template. This base
configuration file can then be downloaded to multiple switch modules.
same, you can manually configure one switch module, upload the configuration to a TFTP
server, and use that configuration file as a base configuration template. This base
configuration file can then be downloaded to multiple switch modules.
Small configuration changes can be pushed out to multiple switch modules by creating a
configuration file with just the configuration items desired. The configuration file can be
downloaded to each switch module needing the change. Refer to Appendix H, XML
Configuration, for additional information regarding the XML configuration file.
configuration file with just the configuration items desired. The configuration file can be
downloaded to each switch module needing the change. Refer to Appendix H, XML
Configuration, for additional information regarding the XML configuration file.
Switch module IP addresses are acquired by default using DHCP, therefore, each module has
a unique IP address. Each switch module can be remotely accessed from a central deployment
server and an individual switch module configuration can be downloaded to meet specific
network requirements. Refer to the management interface reference guides for more
information on using a TFTP server to upload and download configuration files.
a unique IP address. Each switch module can be remotely accessed from a central deployment
server and an individual switch module configuration can be downloaded to meet specific
network requirements. Refer to the management interface reference guides for more
information on using a TFTP server to upload and download configuration files.
Cabling the Interconnect Tray
After installing the interconnect switch hardware and planning the configuration, cable the
interconnect tray to your network.
interconnect tray to your network.
CAUTION: In order to avoid damaging the server blade enclosure, observe the following
guidelines when cabling:
guidelines when cabling:
•
Connect the AC power cords last.
•
Be sure to connect both AC power cords for redundancy and proper cooling.
•
Bundle all cables and route them to the edge of the rack for proper cooling and airflow.
2-10
HP ProLiant BL e-Class C-GbE Interconnect Switch User Guide
HP CONFIDENTIAL Codename: DeLorean Part Number: 263682-002 Last Saved On: 2/5/03 10:41 AM