HP proliant bl e-class Manual De Usuario

Two example template configuration files have been provided as a basis to create an 
appropriate safe mode configuration. Each file is delivered with the Switch Management 
Utilities package specific to a particular type of interconnect switch. 

• 
• 

• 

esafe_ex.xml 

psafe_ex.xml 

 

NOTE:  The templates provided are only examples, and should not be used in a production 
environment without modifications rquired for your specific production network. These templates have 
commented sections for IP configuration, password protection, and port selection. 

Copy the example “Safe Mode” template to a new name. Perform modifications appropriate 
for your production environment. While the list below describes some of the most common 
modifications, your environment may require additional settings such as VLAN 
configuration. These basic areas are preceded by comments that include “SM:”. Use an editor 
such as WordPad or a standard Linux editor. 

 

Change the following settings if “Manual” IP settings are required. 

<!--                                                      --> 

<!-- SM: Change the following settings if “Manual” IP settings are 
required. --> 

<IP_ADDRESS>  

<GET_IP_FROM VALUE="DHCP"/>  

<IP_ADDRESS VALUE="10.90.90.90"/>  

<SUBNET_MASK VALUE="255.0.0.0"/>  

<DEFAULT_GATEWAY VALUE="0.0.0.0"/>  

<MANAGEMENT_VID VALUE="1"/>  

</IP_ADDRESS>