HP procurve 2500 Manual De Usuario

    26

Enhancements in Release F.05.05 through F.05.60

For example, suppose that the switch is in its default configuration (no multiple VLANs; GVRP 
disabled, all ports untagged members of the default VLAN—VID = 1) with two optional gigabit 
transceivers installed, and you wanted to use the switch ports as shown in table table 3, “Port Isolation Plan”:

1 - 3

Local ports only for isolated work-
group access. (No network or 
internet access.)

• Traffic between any ports in the 

local set (ports 1, 2, and 3)

• Traffic between any port in the 

local set and any port in the public 
set (ports 10, 11, or 12) 

Traffic between any port in 
the local set and any  port in 
the private, group1,  or 
uplink port sets

4 - 8

Group1 ports for workgroup and 
network/internet access

• Traffic between any ports in the 

group1 set (ports 4 through 8)

• Traffic between any port in group1 

and the uplink ports

Traffic between any port in 
the group1 set (ports 4 - 8) 
and any public, private, or 
local ports

9

Private port to a secure end node; no 
traffic exchange with non-uplink 
ports on the switch.

Traffic between port 9 (private) and 
the gigabit trunk used as an uplink 
(ports 13 and 14).

Traffic between port 9 and  
any port in the local, public, 
or group1 port sets, or any 
other private port on the 
switch

10 - 12

Public ports for typical end-node 
access.

• Traffic between any ports in the 

public set (ports 10, 11, and 12)

• Traffic between any port in the 

public set and any port in the local 
or uplink port sets

Traffic between any port in 
the public set (ports 10 - 12) 
and any port in the group1 
or private port sets

13 -14

Gigabit uplink to the network.

• Traffic between any ports in the 

uplink set (ports 13 and 14)

• Traffic between any port in the 

uplink set and any port in the 
public, private, or group1 sets

Traffic between any port in 
the uplink set and any port 
in the local set