HP proliant dl580 Manual De Usuario

Server component identification 70 

6 

Power on/Standby button 
and LED 

Amber = System has AC power and is in standby mode 

Green = System has AC power and is turned on 

Off = System has no AC power 

 

 

Memory board components and LEDs 

Error indicators remain illuminated when the system is powered off so that the status of the LEDs can still 
be seen. This behavior matches the behavior of all the other error indicators in the server.   

The indicators are only cleared in the following situations: 

•

If the locking switch is locked after the board is reinstalled 

•

If the server is rebooted 

•

If the board is removed from the server 

  CAUTION:  When the memory board locking switch is unlocked in a mode that does not support hot-add or 

hot-replace capabilities, audio alarms and visual alerts occur. Removing the memory board at this point 
causes server failure. 

To end the audio alarms and visual alerts, move the memory board locking switch back to the locked position. 

This action does not result in data corruption or server failure. 

If removal of a single memory board is required and it is the only memory board, power down the server and 

make the necessary memory changes. 

 

 

1 Locking 

switch 

N/A 

2 Release 

latch 

N/A 

3 Ejector 

lever 

N/A 

4 Removable 

Off = Do not remove memory board if 
server is powered on 

Green = Memory board can be safely 
removed