HP proliant dl380 Manual De Usuario

 

Hardware options installation 52 

1. 

Remove the power supply blank. 

 

  

 

WARNING:

  To reduce the risk of electric shock or damage to the equipment, do not connect 

the power cord to the power supply until the power supply is installed. 

  

2. 

Slide the power supply into the power supply bay until the release/lock lever clicks, securing the 

power supply. 

 

3. 

Connect the power cord to the power supply. 

4. 

Tighten the two retaining screws on either side of the power cord connector. 

5. 

Route the power cord: 

o 

If the cable management arm has a left-hand swing, route the power cord through the cable 

management arm.  

o 

If the cable management arm has a right-hand swing, remove the cable management arm or 

convert it for left-hand swing. For removal instructions, see "Cable management arm with right-

)." For conversion instructions, see the instructions that ship with the 2U 

Quick Deploy Rail System. 

6. 

Connect the power cord to the DC power source. 

7. 

Be sure that the power supply and external health LEDs are illuminated green.