HP proliant dl380 Manual De Usuario

 

Configuration and utilities  66 

Integrated Lights-Out 2 technology 

The iLO 2 subsystem is a standard component of selected ProLiant servers that provides server health and 

remote server manageability. The iLO 2 subsystem includes an intelligent microprocessor, secure memory, 

and a dedicated network interface. This design makes iLO 2 independent of the host server and its 

operating system. The iLO 2 subsystem provides remote access to any authorized network client, sends 

alerts, and provides other server management functions. 
Using iLO 2, you can: 

•

 

Remotely power up, power down, or reboot the host server. 

•

 

Send alerts from iLO 2 regardless of the state of the host server. 

•

 

Access advanced troubleshooting features through the iLO 2 interface. 

•

 

Diagnose iLO 2 using HP SIM through a web browser and SNMP alerting. 

For more information about iLO 2 features, refer to the iLO 2 documentation on the Documentation CD or 

on the HP website (

 

Erase Utility 

  

 

CAUTION:

  Perform a backup before running the System Erase Utility. The utility sets the system 

to its original factory state, deletes the current hardware configuration information, including 

array setup and disk partitioning, and erases all connected hard drives completely. Refer to the 

instructions for using this utility. 

  

Run the Erase Utility if you must erase the system for the following reasons: 

•

 

You want to install a new operating system on a server with an existing operating system. 

•

 

You encounter an error when completing the steps of a factory-installed operating system installation. 

The Erase Utility can be accessed from the Maintenance Utilities menu of the SmartStart CD ("

 

StorageWorks library and tape tools 

HP StorageWorks L&TT provides functionality for firmware downloads, verification of device operation, 

maintenance procedures, failure analysis, corrective service actions, and some utility functions. It also 

provides seamless integration with HP hardware support by generating and emailing support tickets that 

deliver a snapshot of the storage system.  
For more information, and to download the utility, refer to the StorageWorks L&TT website 

(

 

HP Systems Insight Manager 

HP SIM is a web-based application that allows system administrators to accomplish normal administrative 

tasks from any remote location, using a web browser. HP SIM provides device management capabilities 

that consolidate and integrate management data from HP and third-party devices. 

  

 

IMPORTANT:

  You must install and use HP SIM to benefit from the Pre-Failure Warranty for 

processors, SAS and SCSI hard drives, and memory modules. 

  

For additional information, refer to the Management CD in the HP ProLiant Essentials Foundation Pack or 

the HP SIM website (