HP proliant blade bl460c Manual De Usuario

NOTE: Memory configurations listed do not apply to "Factory Integrated Models".

All DIMMs must be PC2-5300 Fully Buffered DIMMs at 667 MHz.

1.

Both DIMM slots in a memory bank must be populated.

2.

Banks must be populated in sequential alphabetic order, starting with bank A.

3.

Both DIMMs in a memory bank must be identical. Install identical DIMMs as pairs only, starting with DIMM socket 1,
bank A.

4.

Multiple advanced memory protection (AMP) modes are supported, based on FBDIMM population and RBSU
selection. The server blade defaults to Advanced ECC

5.

HP ProLiant BL460c Server Blade (1P Model)
Standard Memory
1024 MB (2 x 512 MB) or 2048 MB (2 x 1024 MB) (depending on model)of PC2-5300, FBD DDR2-667 ECC DIMMs

Standard Memory Plus Optional Memory
Up to 50176 MB or 51200 MB (depending on model) of PC2-5300, FBD DDR2-667 ECC DIMMs. Memory is available with
the installation of optional PC2-5300, FBD DDR2-667 DIMM memory expansion kits.

Standard Memory Replaced with Optional Memory
Up to 65536 MB of PC2-5300, FBD DDR2 FBD-667 ECC DIMMs. Memory is available with removal of standard and the
installation of optional PC2-5300, FBD DDR2-667 DIMM memory expansion kits.

Following are memory options available from HP:

 

1GB FBD PC2-5300 (2 x 512 MB) Kit

397409-B21

2GB FBD PC2-5300 (2 x 1 GB LP) Kit

461826-B21

2GB FBD PC2-5300 (2 x 1 GB) Kit

397411-B21

4GB FBD PC2-5300 (2 x 2 GB LP) Kit

461828-B21

4GB FBD PC2-5300 (2 x 2 GB) Kit

397413-B21

8GB FBD PC2-5300 (2 x 4 GB) Kit

397415-B21

8GB FBD PC2-5300 (2 x 4 GB LP) Kit

466440-B21

16 GB FBD PC2-5300( 2x8 GB) Kit

413015-B21

DA - 12518   U.S. QuickSpecs — Version 27 — 5/12/2008

Page 28