HP ProLiant ML330 G6 Manual De Usuario
Hardware options installation 49
4.
Connect the power cord to the power supply.
5.
Using the retaining clip shipped with the server, secure the power cord to the power supply handle.
Securing the cord will ensure enough slack.
Securing the cord will ensure enough slack.
6.
Connect the power cord to the AC power source.
7.
Be sure that the power supply LED is illuminated green ("
Redundant fan assembly option
To install the component:
1.
Power down the server (on page
2.
Do one of the following:
o
Open or remove the tower bezel, as needed ("
o
Extend the server from the rack (on page
3.
Remove the access panel (on page
4.
Remove the air baffle (on page
5.
Remove the fan from fan bay 1.5.
6.
Install the removed fan in fan bay 2.