HP proliant dl585 Manual De Usuario
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must
start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option only available as a Factory Installable Option.
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must
start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option only available as a Factory Installable Option.
Step 1: Base Configuration
Models
HP ProLiant DL585 G2 Rack CTO Chassis
418633-B21
Factory Integrated Models ship with:
Two embedded NC371i Multifunction Gigabit Network Adapters
Integrated Lights-Out 2 (iLO 2) Standard management
Six (6) Redundant Hot Plug Fans
One Hot Plug Power Supply
Rack 4U Form Factor
Integrated Lights-Out 2 (iLO 2) Standard management
Six (6) Redundant Hot Plug Fans
One Hot Plug Power Supply
Rack 4U Form Factor
Step 2: Choose Required Options (only one of the following from each list unless
otherwise noted)
otherwise noted)
Processors
AMD Opteron 8224SE 3.2 GHz-1 MB Dual-Core Processor (120W) 2P Option
Kit
Kit
458932-L21
AMD Opteron 8222 3.0 GHz-1 MB Dual-Core Processor (95W) 2P Option Kit
458933-L21
AMD Opteron 8222SE 3.0 GHz-1 MB Dual-Core Processor (120W) 2P Option
Kit
Kit
448184-L21
AMD Opteron 8220 2.8 GHz-1 MB Dual-Core Processor (95W) 2P Option Kit
439728-L21
AMD Opteron 8220SE 2.8 GHz-1 MB Dual-Core Processor (120W) 2P Option
Kit
Kit
413934-L21
AMD Opteron 8218 2.6 GHz-1 MB Dual-Core Processor 2P Option Kit
413933-L21
AMD Opteron 8216 2.4 GHz-1 MB Dual-Core Processor 2P Option Kit
413932-L21
AMD Opteron 8214 2.2 GHz-1 MB Dual-Core Processor 2P Option Kit
416734-L21
AMD Opteron 8212 2.0 GHz 1 MB Dual-Core Processor 2P Option Kit
NOTE: If four processors are desired, select one 413931-L21 and one 413931-
B21.
B21.
413931-L21
Base Memory
1 GB REG PC2-5300 (2 x 512 MB) single rank
408850-B21
2 GB REG PC2-5300 (2 x 1 GB) single rank
408851-B21
4 GB REG PC2-5300 (2 x 2 GB) dual rank
408853-B21
8 GB REG PC2-5300 (2 x 4 GB) dual rank
408854-B21
NOTE: Memory must be ordered in like-pairs, i.e. two of the same size.
NOTE: If all four banks on a memory node are populated, the maximum memory
clock speed will be 533 MHz. If two or fewer banks on a memory node are
populated, the maximum memory clock speed will be 667 MHz.
clock speed will be 533 MHz. If two or fewer banks on a memory node are
populated, the maximum memory clock speed will be 667 MHz.
QuickSpecs
HP ProLiant DL585 Generation 2
Configuration Information - Factory Integrated Models
DA - 12575 U.S. QuickSpecs — Version 28 — 11/27/2007
Page 17