HP scanjet 7400c Manual De Usuario
6
Installing and troubleshooting
4. Install software
a
Quit all open programs.
b Insert the CD-ROM. The installation program should start automatically.
If the installation program does not start: On the Start menu, click Run and
type:
type:
x:setup.exe
, where x is the letter of the CD-ROM drive.
c
Follow the directions on screen.
The installation program suggests which connection, USB or SCSI, you should
use.
use.
5. Connect interface cable
a
Turn off the computer.
b Choose ONE:
●
Connect the USB cable between the USB ports on the scanner and the
computer.
computer.
●
Connect the SCSI cable between the SCSI ports on the scanner and the
computer. Note: You MUST install the scanning software before
connecting a SCSI cable.
computer. Note: You MUST install the scanning software before
connecting a SCSI cable.
6. Connect the power cable
a
Connect the power cable between the scanner and a surge protector or
grounded wall outlet that is easily accessible. This turns on the scanner.
(There is no power switch.)
grounded wall outlet that is easily accessible. This turns on the scanner.
(There is no power switch.)
b Turn on the computer.
If you see a dialog box informing you that new hardware has been found, follow
the directions on screen.
If you see a dialog box informing you that new hardware has been found, follow
the directions on screen.
SCSI
USB