Black & Decker X810 Manual De Instrucciónes

•  Set the temperature control dial to the 

min position before plugging in or out.

•  Let the appliance cool down before 

leaving it unattended and before 

cleaning or inspecting any parts of the 

appliance.

•  The power supply cord should not 

touch the hot soleplate during use or 

during the cool down period.

•  Do not touch the soleplate until it has 

cooled down.

•  Wait until the appliance has cooled 

down before emptying the water tank 

as the water may still be hot.

•  Always diconnect the appliance from 

the supply before filling, emptying, 

cleaning, or carying out any 

maintenance on the appliance.

•  The iron must be used and rested on a 

stable surface

•  The iron is not to be used if it has been 

dropped, if there are visible signs of 

damage or if it is leaking

1. Spray 

button

2. Steam 

control 

dial

3. Steam 

burst 

button

4.  Temperature control dial

5. Heating 

light

6. Heel 

rest

7. Self-clean 

button

8. Cord 

storage

9.  Maximum filling level indicator

10. Water tank

11. Soleplate

12. Water tank cover

13. Spray nozzle

•  Make sure that the appliance is 

unplugged.

•  Fill the appliance with water as 

described below.

•  Use the self-clean system as described 

below. When finished, wipe the 

soleplate and steam vents with a cloth.

Some parts of the appliance have been 

lightly greased and as a result the appliance 

may smoke slightly when switched on for 

the first time. This will cease after a short 

while.

Warning! Before assembly, make sure that 

the appliance is switched off and 

unplugged.

In order to be able to use the steam 

function or the spray feature, you will first 

need to fill the water tank with water.

•  Make sure that the appliance is 

unplugged.

•  Open the water tank cover (12).

•  Hold the appliance at an angle as 

shown.

•  Fill the appliance with water using the 

beaker provided.

•  Close the water tank cover.

-5-