Canon DR-5060F Manual De Usuario

Setting Scan Conditions

■

This scanner is initially set to automatically detect the thickness of paper during
scanning. This function, however, may not function properly when scanning
extremely thick or thin paper. If this happens, the user must manually adjust the
paper thickness so that documents are fed smoothly through the scanner.
The procedure for manually adjusting the paper thickness is as follows:

The function key blinks, and “Adj” appears blinking on the counter display. The
Semi-Auto lamp at Feeding Option lights, and the Start key blinks green.

A

Scanner

To cancel the manual paper thickness adjustment function, press the blinking
key or the Stop key.

This scans the document, and the paper thickness is displayed on the brightness
indicator.

The paper thickness displayed on the indicator is not an accurate paper
thickness, but serves as an aid when adjusting the paper thickness.

Pressing the   or   key moves the indicator display to the left and right, respectively.

To set a thicker paper setting, press the   key. To set a thinner paper setting, press
the   key. The paper thickness can be adjusted in 13 steps.

This sets the paper thickness, and resets the counter display.

●

To enable the value set in the above procedure, you must set Fixed
Thickness Mode (See “Fixed Thickness Mode” P. 54).

●

The paper thickness can also be adjusted in the application. When the paper
thickness has been adjusted on both the scanner operation panel and in the
application, priority is given to the last made setting.