Canon imageclass mf4150 Guía Del Usuario
1
2
3
4
5
6
Back
5-11
No automatic switching between telephone and fax calls.
Q
Is the machine set to switch automatically
between telephone and fax calls?
between telephone and fax calls?
A
For the machine to switch between fax and
telephone calls automatically, the receive mode
must be set to <AnsMode>, <DRPD> or <FAX/
TEL>. If you have set <AnsMode>, confirm that an
answering machine is connected to the machine
and that it is turned on with an outgoing message
properly recorded. (See “Setting the Receive
Mode,” on p. 1-8.)
telephone calls automatically, the receive mode
must be set to <AnsMode>, <DRPD> or <FAX/
TEL>. If you have set <AnsMode>, confirm that an
answering machine is connected to the machine
and that it is turned on with an outgoing message
properly recorded. (See “Setting the Receive
Mode,” on p. 1-8.)
Q
Is a document stored in memory, leaving little
or no memory available?
or no memory available?
A
Print, send, or delete any documents stored in
memory.
memory.
Q
Has an error occurred during reception?
A
Check the LCD for an error message. (See
Chapter 11, “Troubleshooting,” in the Basic Guide.)
Chapter 11, “Troubleshooting,” in the Basic Guide.)
A
Print an Activity Report and check for an error.
(See “ACTIVITY REPORT,” on p. 4-5.)
(See “ACTIVITY REPORT,” on p. 4-5.)
Q
Is paper loaded in the machine?
A
Make sure paper is loaded in the machine. (See
“Set Up the Paper Cassette and Load Paper,” in the
Starter Guide.)
“Set Up the Paper Cassette and Load Paper,” in the
Starter Guide.)
Q
Can the sender’s machine send the CNG signal,
which tells your machine that the incoming call
is a fax call?
which tells your machine that the incoming call
is a fax call?
A
Some machines cannot send this signal. In such
cases, receive the fax manually.
cases, receive the fax manually.