Canon imageclass mf4100 series Manual De Usuario

11

Connect the power cord into the rear socket and 
the wall outlet, and press the [I] side of the main 
power switch to ON.

The machine enters the standby mode.

● <CLOSE COVER/PRINTER COVER> is displayed:

Make sure that the printer cover and scanning platform are closed properly. (See “Install Toner Cartridge,” on p. 
5.)

● <TONER IS NOT SET/INSERT TONER> is displayed:

Make sure that the toner cartridge is installed properly. (See “Install Toner Cartridge,” on p. 5.)

● <LOAD PAPER> is displayed:

Make sure that paper is loaded in the machine. (See “Set Up the Paper Trays and Load Paper,” on p. 7.)

This product emits low level magnetic flux. If you use a 
cardiac pacemaker and feel abnormalities, please move 
away from this product and consult your doctor.

– During electrical storms, disconnect the power cord 

from the power outlet. (Please note that any 
documents stored in the machine’s memory will be 
deleted when you unplug the power cord.)

– Whenever you unplug the machine, wait at least five 

seconds before you plug it in again.

– Do not plug the machine into an uninterruptible power 

supply (UPS).

1 0 0 %               A 4
          T E X T / P H O T O         1

Ex.

12