Canon imagerunner c3380 Manual De Usuario
Printing Problems
6-17
6
Tro
uble
shootin
g
Data that should be printed on the same page is printed on two separate pages.
Cause 1
The application software's "Line spacing" and "Number of lines on a page"
settings are not correct.
settings are not correct.
Remedy
Change the settings so that the data fits on one page and print the data again.
(See the application software manual.)
(See the application software manual.)
Cause 2
The 'Timeout' setting is too short, when the 'Personality' setting is set to [Auto].
Remedy
Change the 'Personality' setting to a setting other than [Auto], or increase the
'Timeout' setting. (See "Personality," on p. 3-42, and "Timeout," on p. 3-27.)
'Timeout' setting. (See "Personality," on p. 3-42, and "Timeout," on p. 3-27.)
Print Quality Problems
The printout is too light or too dark.
Cause 1
The toner density settings are not correct.
Remedy
Adjust the toner density and print the data again. (See "Density," on p. 3-17.)
Cause 2
'Toner Save' is set to [On].
Remedy
Set 'Toner Save' to [Off] in the printer driver and print the data again. (See the
Help function on the printer driver.)
Help function on the printer driver.)
NOTE
You can also perform the same procedure from the touch panel display. (See "Toner
Save," on p. 3-18.)
Save," on p. 3-18.)
Cause 3
The machine's density settings are not adjusted correctly.
Remedy
Perform an Automatic Gradation Adjustment. (See Chapter 4, "Customizing
Settings," in the Reference Guide.)
Settings," in the Reference Guide.)