Canon multipass l60 Manual De Usuario
Chapter 9
Frequently Asked Questions 9-5
Frequently Asked
Questions
❏
Is the L60 warm to the touch?
The unit might have overheated and shut down. Turn the unit off and let
it cool down for several minutes but less than one hour, or you might lose
information registered in memory. Try using it again.
it cool down for several minutes but less than one hour, or you might lose
information registered in memory. Try using it again.
❏
Are you not able to make copies?
The handset might be out of the cradle. Make sure the handset is in its
cradle.
cradle.
Documents Are Not Printing Correctly.
❏
Is the operation panel blank?
You might have a power problem. Check that the power cord is plugged
securely into the unit, and that your electrical source is OK.
securely into the unit, and that your electrical source is OK.
❏
Is the L60 warm to the touch?
The unit might have overheated and shut down. Turn the unit off and let
it cool down for several minutes but less than one hour, or you might lose
information registered in memory. Try using it again.
it cool down for several minutes but less than one hour, or you might lose
information registered in memory. Try using it again.
❏
Is the ALARM light on?
Turn off the L60 unit. Wait 15 seconds and plug it in again to turn on
power. The ALARM light should go out. Also check to see if paper is
jammed.
power. The ALARM light should go out. Also check to see if paper is
jammed.
❏
Does the L60 LCD display read “Check Paper Size”?
If you are printing from a Windows application, the print setup options
may be conflicting. Make sure that the selected paper sizes correspond in
the following:
may be conflicting. Make sure that the selected paper sizes correspond in
the following:
❏ L60 paper feeder
The paper in the L60 feeder must be the same size as the settings you
have selected, whether it feeds manually or automatically.
The paper in the L60 feeder must be the same size as the settings you
have selected, whether it feeds manually or automatically.