Canon pixma mp180 Manual De Usuario

Descargar
Página de 128
Chapter 7 
63
Printing Photographs Directly From A Digital Camera
z
About “Layout” and “Trimming”
For “Layout”, when the “Default setting” (selections based on the machine setting) is 
selected, the machine operates based on the bordered/borderless setting specified in the 
Memory card mode of the machine (MP180) or the Fit-to-Page setting when Photo Paper 
is selected on the Operation Panel of the machine (MP160). Trimming is performed based 
on settings on the PictBridge-compliant device.
z
About “Image optimize”
When “Default setting” (selections based on the machine setting) is selected, the machine 
operates based on the <IMAGE ENHANCEMENT> settings mode using the controls of the 
machine (MP180).
If you use a Canon PictBridge-compliant device, you can select “VIVID”, “NR”, “VIVID+NR” 
or “FACE”.
(Note that these options cannot be selected for some models.)
z
About “Date/File No. print”
By default, “Off” is selected for this machine.
If you select an image which has had the shooting date embedded in it using a camera with 
the print mode, select “Off” for this function. If you select “Date”, “File No.”, or “Both”, the 
date and/or file number will be printed over the embedded date (MP180).
Note
z
When printing onto Photo Stickers (PS-101) (16-up), use the following 
settings.
1. Load Photo Stickers (PS-101) in the Auto Sheet Feeder.
2. Select “10 x 15 cm / 4" x 6"” for the “Page size”, and “Photo” for the 
“Media type”.
3. Select “N-up” for layout, then select “16”.
z
Some PictBridge compliant devices display the Layout option; 2-up, 4-
up, 9-up, and 16-up. In this case always select “16-up”. If there are no 
options on the PictBridge compliant device that correspond to 2-up, 4-
up, 9-up, or 16-up, printing on stickers is not possible.
z
When you are using Photo Stickers (PS-101), do not set “Borderless 
Printing” in “Layout” settings.
Note
z
When “VIVID” is selected, the green and blue portions of photos are 
printed more vividly.
z
When “NR” (Noise Reduction) is selected, noise in blue portions, such 
as the sky, and dark portions is removed.
z
When “VIVID+NR” is selected, functions of both “VIVID” and “NR” are 
performed.
z
When “FACE” is selected, a darkened face on the photo taken against 
the light is brightened.
Note
z
Never disconnect the USB cable during printing.
z
When disconnecting the USB cable between the device and machine, 
follow the instructions given in the instruction manual of the device.
z
Controls of the device cannot be used for the following:
– Print quality setting
– Machine maintenance
z
For the device operation method and troubleshooting, refer to your 
digital device’s manual.