Canon pixma ip4300 Manual De Usuario

Página de 102
77
Troubleshooting
Eight flashes: Ink absorber is almost 
full.
The printer has a built-in ink absorber to hold the ink used during Print Head 
Cleaning, for example.
Eight flashes indicates that the ink absorber is nearly full.
Press the RESUME/CANCEL button to cancel the error so you can continue 
printing.
Before the ink absorber becomes completely full, contact a Canon service 
representative. (You will need to replace a particular part of the printer.)
Important
Canon recommends that you call for service as soon as this error occurs. Once 
the ink absorber becomes completely full, printing cannot be performed until the 
ink absorber is replaced.
Nine flashes: No response from 
connected digital camera or video 
camcorder. / Connected digital camera 
or video camcorder is not compatible 
with this printer.
Disconnect the cable connecting the printer and the device, and then reconnect 
it.
Depending on the model or brand of your device, you may have to select a 
PictBridge-compliant print mode on the device before connecting it to the 
printer. You may also have to turn on the camera or select Play mode manually 
after connecting the device to the printer. 
Perform necessary operations according your device’s instruction manual 
before reconnecting it to the printer.
If the error is still not resolved, there is a possibility that you are using a digital 
camera or digital video camcorder that is not supported by this printer. Use a 
digital camera or digital video camcorder compatible with this printer.
Ten Flashes: Cannot perform duplex 
printing.
The size of paper may not be compatible with automatic duplex printing. The 
sizes of media suitable for auto duplex printing are A4, Letter, A5, and 5" x 7". 
Make sure that the size of the paper loaded in the printer is correct. Pressing the 
RESUME/CANCEL button will eject the paper and restart printing from the front 
side of the next paper. The reverse side of the ejected sheet will not be printed.
Eleven flashes: Automatic Print Head 
Alignment failed.
Possible causes are as follows:
z
Paper of size other than A4 or Letter is loaded in the Auto Sheet Feeder.
Press the RESUME/CANCEL button on the printer to dismiss the error, then 
load a sheet of A4/Letter-sized paper in the Auto Sheet Feeder.
Automatic Print Head Alignment cannot be performed using paper from the 
Cassette. For Automatic Print Head Alignment, always load paper in the Auto 
Sheet Feeder.
z
Print Head nozzles are clogged. 
Press the RESUME/CANCEL button to dismiss the error, and print the 
nozzle check pattern to check the status of the Print Head. See “Printing the 
Nozzle Check Pattern” on page 36.
z
The Paper Output Slot is exposed to strong light.
Press the RESUME/CANCEL button to dismiss the error, and then adjust 
your operating environment and/or the position of the printer so that the 
Paper Output Slot is not exposed directly to strong light.
After carrying out the above measures, if the problem continues after aligning 
the Print Head again, press the RESUME/CANCEL button to dismiss the error, 
and then perform Manual Print Head Alignment. For details on Manual Print 
Head Alignment, see “Manual Print Head Alignment” on page 47.
Thirteen Flashes: Ink level cannot be 
detected.
The remaining ink level cannot be correctly detected.
Replace the ink tank and close the Top Cover.
Printing with an ink tank that was once empty may damage the printer.
If you want to continue printing in this condition, you need to release the function 
for detecting the remaining ink level. Press and hold the RESUME/CANCEL 
button for at least 5 seconds, and then release it.
* With this operation, releasing the function for detecting the remaining ink level 
is memorized. Please be advised that Canon shall not be liable for any printer 
malfunction or damage caused by refilled ink tanks.
See “Replacing an Ink Tank” on page 26.
Fourteen Flashes: Ink tank cannot be 
recognized.
The ink tank is not compatible with this printer. (The lamp on the ink tank is off.) 
Install an appropriate ink tank.
See “Replacing an Ink Tank” on page 26.
Cause
Action
downloadlike
ArtboardArtboardArtboard
Report Bug