Canon pixma mp600 Guía De Instalación Rápida
86
Troubleshooting
Error Regarding Automatic Duplex Printing Is Displayed
Error No.: 300 Is Displayed
Cause
Action
The correct media size is not selected
in the MP Drivers.
in the MP Drivers.
First, check the Page Size setting in the application software you are printing
from.
Then, check the Page Size setting on the Page Setup sheet in the printer
properties dialog box (Windows) or the Page Setup dialog box (Macintosh).
The page sizes that can be used for Automatic Duplex Printing are Letter, A4,
B5, A5, and 5" x 7" / 127.0 x 177.8 mm. Check that the page size of the loaded
paper is correct.
from.
Then, check the Page Size setting on the Page Setup sheet in the printer
properties dialog box (Windows) or the Page Setup dialog box (Macintosh).
The page sizes that can be used for Automatic Duplex Printing are Letter, A4,
B5, A5, and 5" x 7" / 127.0 x 177.8 mm. Check that the page size of the loaded
paper is correct.
Note
To switch to manual duplex printing, follow the procedure below.
On the Page Setup sheet, clear the Automatic check box. Then try printing
again.
again.
Manual duplex printing is not available.
Cause
Action
The machine is not ready.
Make sure that the machine is turned on, and that it is connected securely to the
computer.
If the POWER lamp is off, turn the machine on.
While the POWER lamp is flashing green, the machine is initializing. Wait until
the POWER lamp stops flashing and remains lit green.
When the ALARM lamp is lit orange, an error may have occurred on the
machine. For details on how to resolve the error, see “Error Message Is
Displayed on the LCD” on page 68.
computer.
If the POWER lamp is off, turn the machine on.
While the POWER lamp is flashing green, the machine is initializing. Wait until
the POWER lamp stops flashing and remains lit green.
When the ALARM lamp is lit orange, an error may have occurred on the
machine. For details on how to resolve the error, see “Error Message Is
Displayed on the LCD” on page 68.
Machine is not connected properly.
Make sure that the USB cable is plugged in securely to the computer and the
machine.
z
machine.
z
If you are using a relay device such as a USB hub, disconnect it, connect the
machine directly to the computer, and try printing again. If printing starts
normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.
machine directly to the computer, and try printing again. If printing starts
normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.
z
There could also be a problem with the USB cable. Replace the USB cable
and try printing again.
and try printing again.
Your machine is not selected in Printer
on the Print dialog box.
on the Print dialog box.
Select MP600 in Printer on the Print dialog box.
If MP600 does not appear in Printer, follow the procedure below to check that
the driver for your machine is installed to your computer.
(1)Select Print and Fax Preferences from Printer.
If MP600 does not appear in Printer, follow the procedure below to check that
the driver for your machine is installed to your computer.
(1)Select Print and Fax Preferences from Printer.
In Mac OS X v.10.2.8 or 10.3.x, select Edit Printer List from Printer.
(2)Check that MP600 is displayed in the list of printers and that the check box is
selected.
In Mac OS X v.10.2.8, check that MP600 is displayed in Printer List.
In Mac OS X v.10.2.8, check that MP600 is displayed in Printer List.
(3)If MP600 is not displayed, click Add(+) to add the machine.
If you cannot add the machine, follow the procedure described in the Easy
Setup Instructions to reinstall the MP Drivers.
Setup Instructions to reinstall the MP Drivers.