Nikon DS-2MV Manual De Usuario
VI Basic Operations
MICROSCOPE
6 Using the Microscope Control
- 149 -
Objective <Shows magnification and NA value of the objective >
Compatible only with Nikon 80i/90i microscopes that have motorized or intelligent nosepieces
attached.
attached.
1) The menu indicates the magnification and NA value of the current objective in the
nosepiece column
.
NOTE:
*
*
Before using this function, you must set up the objective information from a
PC with the setup software. For more information, refer to the instruction
manual for your microscope.
PC with the setup software. For more information, refer to the instruction
manual for your microscope.
*
Use microscope control menu 1 to change objectives.
Stage position (Z axis) <Shows the address along vertical axis>
Compatible only with the Nikon 90i microscope.
1) The menu indicates the height of the current Z (focus) position (i.e., position along the Z
axis)
.
NOTE: Use microscope control menu 1 to adjust focus.
Stage position (X axis) <Shows address along lateral axis>
Compatible only with Nikon 90i microscopes connected to a motorized stage.
1) The menu indicates the current lateral stage position (position along the X axis)
.
NOTE: Use microscope control menu 1 to adjust the stage position laterally.
Stage position (Y axis) <Shows the address along longitudinal axis>
Compatible only with Nikon 90i microscopes connected to a motorized stage.
1) The menu indicates the current longitudinal stage position (position along the Y axis)
.
NOTE: Use microscope control menu 1 to adjust the stage position longitudinally.