Samsung dvd-v440 Manual De Usuario
ENG-9
Plug & Auto Set up
Tuning Your Television for the
DVD-VCR
DVD-VCR
Your DVD-VCR will automatically set itself up when it
is plugged into the mains for the first time. TV stations
will be stored in memory. The process takes a few
minutes. Your DVD-VCR will then be ready for use.
is plugged into the mains for the first time. TV stations
will be stored in memory. The process takes a few
minutes. Your DVD-VCR will then be ready for use.
1
Connect the coaxial cable as indicated on page 7.
(Connecting Your DVD-VCR to the TV Using the
Coaxial Cable)
(Connecting Your DVD-VCR to the TV Using the
Coaxial Cable)
2
Plug the DVD-VCR into the mains.
Result: The Language Set menu is displayed.
Result: The Language Set menu is displayed.
3
Select the required language by pressing the
or
❷
buttons.
4
Press OK to store the language selected.
Result: A message appears.
Result: A message appears.
5
Press OK to start the auto scanning.
◆
The number of stations automatically stored by
theVCR depends on the number of stations that
it has found.
theVCR depends on the number of stations that
it has found.
You must tune your television for the DVD-VCR only if
you are not using a RCA cable
you are not using a RCA cable
➢
To view pictures from your DVD-VCR when a
RCA cable is used, the television must be set to
the audio/video mode (AV).
RCA cable is used, the television must be set to
the audio/video mode (AV).
1
Switch on the television.
2
Switch on the DVD-VCR by pressing STANDBY/ON
on the front of the DVD-VCR or STANDBY/ON on
the remote control.
on the front of the DVD-VCR or STANDBY/ON on
the remote control.
3
Select a programme position on the television to be
reserved for use with your DVD-VCR.
reserved for use with your DVD-VCR.
4
Insert the video cassette in the DVD-VCR. Check
that the DVD-VCR starts reading the cassette; if
not, press
that the DVD-VCR starts reading the cassette; if
not, press
❿
II
button.
5
Start a scan on your television or set the television
to UHF channel 36.
to UHF channel 36.
6
Fine tune the television until the pictures and sound
are obtained clearly.
are obtained clearly.
7
If you cannot find the pictures and sound, or there
is interference from nearby channels, it may be
necessary to change the setting of the DVD-VCR
output channel (see Setting the DVD-VCR Output
Channel on page 14 and Problems and Solutions
on page 44).
is interference from nearby channels, it may be
necessary to change the setting of the DVD-VCR
output channel (see Setting the DVD-VCR Output
Channel on page 14 and Problems and Solutions
on page 44).
8
When the picture and sound are perfectly clear,
store this channel at the desired programme
position on the television.
Result: That programme is now reserved for use
store this channel at the desired programme
position on the television.
Result: That programme is now reserved for use
with your DVD-VCR.
Auto setup
Please wait
00 %
Clock Set
12 : 00 1/JAN 2004 THU
Time Date Year
➢
Auto preset can be performed by pressing ■ on
the VCR continuously for 5 seconds or more with
no tape inserted.
the VCR continuously for 5 seconds or more with
no tape inserted.
00413B DVD-V540/XSG-ENG 5/6/04 12:07 PM Page 9