Juniper CBL-M40-PWR-AU Manual De Usuario
Rack-Mounting Brackets
M40 Internet Router Hardware Guide
94
Rack-Mounting Brackets
Front rack-mounting ears are built into the chassis sides, as shown in Figure 23. If requested,
a center rack-mounting kit can be shipped with the router (see Figure 24). You attach center
rack-mounting ears along the middle of either side of the chassis with the screws provided.
a center rack-mounting kit can be shipped with the router (see Figure 24). You attach center
rack-mounting ears along the middle of either side of the chassis with the screws provided.
Figure 23: Chassis Showing Mounting Ears
A C-bracket shelf can also be requested, to provide additional support when a router is
mounted above another router (in the upper half of the rack). A router mounted in the lowest
position in the rack is supported by the floor or by the bottom rack rail, so the C-bracket shelf
is not required in that case. Figure 24 shows the C-bracket shelf.
mounted above another router (in the upper half of the rack). A router mounted in the lowest
position in the rack is supported by the floor or by the bottom rack rail, so the C-bracket shelf
is not required in that case. Figure 24 shows the C-bracket shelf.
Routing Engine
1
Power supply with integrated fan
2
Component
Quantity Shipped
Slide guides for FPCs
Craft interface
ESD point
Air filter
Card cage
Backplane
Front rack-mounting ear
Cable managment
system
system
1002
Center rack-mounting ear