Samsung iDCS 16 Manual De Usuario

Hookflash and then dial 18 to disconnect your outside call and receive tele-
phone company dial tone for a new call.

If you receive a busy signal when you select an outside line:

• While on that call, hookflash, receive transfer tone and dial 44.

• When the line becomes free, the system will call you back.

• Lift the handset, receive dial tone and dial the telephone number or

the speed dial number again.

NOTE: A callback will be canceled if it is not answered within 30 seconds.

5

iDCS_16_SLT.qxd  12/14/2004  4:01 PM  Page 9

6

• Lift the handset.

• Dial the extension number or group number.

• Wait for the party to answer. 

• If you hear several brief tone bursts instead of ringback tone, the sta-

tion you called is set for Voice Announce or Auto Answer.

• Begin speaking immediately after the tone.

• Finish the call by replacing the handset.

• Lift the handset and you are automatically connected to the ringing

call.

• Finish the call by replacing the handset.

When you call another station and you receive a busy signal:

• Hookflash, receive transfer tone, dial 44, receive transfer tone and

hang up.

• When the busy station becomes free, your telephone will ring. 

• Lift the handset to automatically call the now idle station. 

NOTE: You have 30 seconds to answer or the callback will be canceled.

When you call another station and receive a busy signal but you do not want
to wait for a callback:

• Hookflash, receive transfer tone and dial 45.
• The called station will receive off-hook ring or camp-on tone.
• You will hear ringback tone.
• Wait for the called party to answer.

The called station must release its first call or put it on hold before answer-
ing your camp-on.

iDCS_16_SLT.qxd  12/14/2004  4:01 PM  Page 10